-
Hello,
wanted to know if I can use it on pi-zero ?
because I'm trying to get GPS data only
```
from gsmHat import GSMHat, SMS, GPS
try:
gsm = GSMHat('/dev/ttyS0', 115200)
except Excep…
-
I have Arduino DUE and SIM7000A. I have already soldered the pins/headers so that the SIM7000A shield goes directly on top of the Due.
I have also already downloaded the libraries. I am using hardw…
-
Hi There, did you try GPS and GSM at the same time, I can not make it works together, I mean If I get GSM connection GPS does not response to AT commands.
Thanks
Lee
-
using a SIM7000A, Hologram dashboard says device is connected usage is 0. I am in Raleigh, NC.
AT+CGREG?
Registered roaming
AT+CPSI?
LTE CAT-M1,Online,310-410,0x2717,195163152,49,EUTRAN-BAND12…
-
[+] I have read the Troubleshooting section of the ReadMe
## What type of issues is this?
[ ] Request to support a new module
[+] Bug or problem compiling the library
[ ] Bug or issue wi…
-
Hi all.
I am doing some tests with an ESP32 Lilygo TTGO SIM7000 and I have warned that there is a problem with HTTP after some time sending data.
When you turn on the ESP32 it works correctly and …
-
Hey,
I wanted to know if it's possible to use positioning and cellular at the same time with SIM7000G ? You only mention SIM7070 not supporting that, but I couldn't find examples on position and cell…
-
Hi guys, I'm seeing inconsistent examples of powering on the modem from what's located inside the examples folder. I don't have issues powering the modem on - but I'm concerned that not powering on an…
-
[ ] Bug or issue with library functionality (ie, sending data over TCP/IP)
Modem: SIM7000G
Main processor board: ESP32
TinyGSM version: latest (0.11.4)
Code:
No need for code. When subscri…
-
Problem: esp32 does not connect to LTE (but it does connect to GPRS!)
In the code, esp32 fails to get network (modem.waitForNetwork() line)
Modem Name: SIMCOM SIM7000G
Modem Info: SIM7000G R1529
C…