-
Same issue as in Thermostat standalone version, details described here:
[Thermostat Issue #110](https://github.com/sinara-hw/Thermostat/issues/110)
-
Scored a 89410a from the army for 500 €...
# Zotino v1.3 output voltage noise
* after 15 cm IDC cable, IDC-SMA, and 100 cm coax (~50 pF) , and 500 k || 150 pF
* 3.5 V DAC output
* on a running…
-
There is good microelectronics group at my depatment. They saw our activities and asked if we need some ASIC development. They have some founding, tools and production possibilities. They have also [b…
-
A few times, I was asked about the feasibility of building something similar to a very low latency PID like [FALC-PRO](https://www.toptica.com/products/laser-rack-systems/laser-locking-electronics/fal…
-
- [x] coutout for microUSB i 7.5mm width and it should be 7.7mm
-
@gkasprow Could you add the CERN OHL 1.2 license as a file, e.g. from https://github.com/sinara-hw/Thermostat_EEM/blob/master/LICENSE.CERN-OHL-v1.2 , to this repo?
-
- replaced EOL buck converter #88
- replaced EOL TVS #91
- added SHDN resistor #94
- fixed DAC PN issue #78
- fixed VBUS label #89
- JTAG pin 1 dot #76
- replaced TVS; added series resist…
-
Quite often while testing the Mirny, `MUXOUT too high/not low` errors occur. From the observations:
1. Often, but still able to use (50% - 70% failure rate) - at CLK freqs >12MHz (including 125MHz mm…
-
cf https://github.com/sinara-hw/Thermostat_EEM/issues/2
-
I got involved in new project at the WUT.
We will build wideband MIMO SDR. Probably on the new RFSoC that:
- are pin compatible with ZU25
- offer 8x 10G DACs and 8x 5G ADCs
You won't find any i…