-
When trying to try GPIO functionality (/dev/gpio) on my STM32's I have a hard fault on both the Nucleo-L496ZG and the Nucleo-F767 with the proximity configuration.
The stack says 100% and the cause i…
-
There are better chips available for future versions of PSLab. One recommendation is LPC43S70FET256: 32-bit ARM Cortex-M4 + 2 x M0 MCU; 282 kB SRAM; Ethernet; two HS USBs; 80 Msps 12-bit ADC; configur…
-
Hi,
Do you know the électrical consumption of your STM32F401 and MPU6050 at 5.5kHz ?
Best,
Cédric
-
I am currently playing around with LoRaWAN and TTN and try to getting SX1276 Modem (nice RF) to work.
I implemented on STM32l4 board. When OTAA join starts the device gets registered on the TTN con…
-
Dear Thomas/Kris,
@GrumpyOldPizza @kriswiner
As you know STM32L476RG board has RTC but it is not connected to a Battery. Hence I would like to use an external RTC like ds1307. But when I use DS130…
-
Hi, i have the ladybug L432KC with Arduino 1.8.5 with all the relevant libraries to support the ladybag.
when i try to upload a sketch (after successfully compiling it for the ladybug) i get this mes…
-
Per microsoft/uf2#46 there is now a JSON file that can be used to generate the values in `hf2/src/bininfo.rs`
I can take a stab at making a script to auto-update this for you.
For your case, the…
-
Hi,
Thank you for giving us such great code to ease our lives. I have a few questions for MPU9250 i hope you can help me make my concept clear
using NodeMCU 160 MHz
1. Why is rate and processor spe…
afnan updated
6 years ago
-
### Answers checklist.
- [x] I have read the documentation [ESP-AT Programming Guide](https://docs.espressif.com/projects/esp-at/en/latest/) and the issue is not addressed there.
- [x] I have used th…
-
It does work correctly with GPIO flow control. :+1:
It drops chars with HW flow control (on chip). :-1:
It also drops chars with DMA with GPIO flow control. :-1:
With DMA the test app hangs o…