-
### Category
WiFi
### Hardware
T-Beam
### Firmware Version
2.3.2.63df972
### Description
The esp32 has a hardcoded 40mhz channel width.
This causes MAJOR issues when connecting t…
-
Would it be possible to make a configurable option to all the USB interface output and allow input KISS data?
My hope is to allow the node to connect to an APRS client and act as a KISS TNC device …
N1obu updated
2 months ago
-
I have a set of T-Beam m8n devices with board revision `T22_V1.1 20210222`
all have been flashed to Meshtastic `2.3.4.ea61808 Beta` with the fully erase option
I have one of 4 devices that constan…
-
I want to power the board without the USB.
Should I provide 5V to the "5V" pin?
Should I provide 3.3V to one of the "3V3" pins?
Would any of the above work?
I guess that if I provide 3.3V, the…
-
### BEE2 Application Version
4.44.1.dev+aaa3b21d 64-bit
### BEE2 Package Version
4.44.0
### What operating system are you running on?
Linux
### Description of the bug
When trying …
-
### Category
Serial
### Hardware
T-Beam S3
### Firmware Version
2.3.6.7a3570a Beta
### Description
I have a python app that connects to a T-Beam Supreme via serial/USB and noticed that I lose t…
-
1. Stratux version: v1.6r1-eu30
2. Stratux config:
SDR
- [ ] single
- [X] dual
GPS
- [X] yes
- [ ] no
type: LILYGO T-BEAM V1.1
AHRS
- [X…
-
### Category
Other
### Hardware
T-Beam, T-Lora v2 1.6
### Firmware Version
2.2.23.5672e68
### Description
I own a TBeam and a TLora 1.6, both flashed with the same version of Meshtastic.
Inita…
-
Hi,
For TBeam Supreme S3, I tried the example: PCF8563_TimeSynchronization
I go the error PCFxxxx not found.
Can you please check the example?
Note: For example "Simpletime" works for me.
Rega…
-
### Category
Other
### Hardware
T-Beam, T-Lora v2 1.6, Heltec V3, Other
### Firmware Version
2.2.23
### Description
On the ANZ mqtt server, Multiple nodes 100s of KMs apart with fixed locations…