-
I'm on Snow Leopard & Firefox. Some times chilipeppr becomes unresponsive. Normally, in that situation I disconnect from JSON and close the chilipepper's Firefox tab. Then, I relaunch both chilipeppr …
-
i think i might be missing something here,
i'm running the latest firmware on a tinyG v8 (Edge-449.01) and the lastest cncjs 1.9.22.
with JSON enabled {sso:n} is not recognized, and is not mentioned…
kbex1 updated
2 years ago
-
hello i need detailed description of pin COOL, PWM, SDIR and SPIN
there are any information at all at the page "Connecting TinyG"
and i can't find anything useful.
i have a spindle driver with input r…
-
Running build 3009, both Linux and Win7_64
On GCode Tab, when cursor is in the Draw PreVue bounding box:
Linux - White cursor on black background
Win7_64 - Black cursor on black backgrou…
-
This is more a question than an issue but I ask it here since there does not seem to exist a forum or mailing list for GRBL: is there an XMega-port available somewhere for GRBL?
thanks!
-
My grandfather recently bought a CNC machine (using TinyG) that was built by another individual. The builder demoed it to him when he bought it and it was working. When my grandfather took it home and…
-
This issue is probably related to #176. I am unable to probe on TinyG with less than 18mm/sec feedrate. I have recorded 2 probing cycles starting with F20, then F19, F18 and F17 resulting in machine f…
-
Motors can run in the incorrect direction when the motor steps per turn parameter is set after the motor has already moved. This can occur when motor parameter setup commands are re-issued on a system…
-
Hi,
I've got the Adblock Plus extension installed in Chrome. When navigating to chilipeppr.com I only get a blank page. The console says this:
![image](https://cloud.githubusercontent.com/assets/131…
-
I am planning on turning over the source of an application to Synthoes that runs a milling machine using TinyG, however there are two issues that I really think need to be addressed before I can do th…