-
Hi,
By making a new board in STM32GENERIC-master for arduino and adapting https://github.com/Aus3D/Marlin/tree/bugfix-2.0.x-F446-PicoPrint for the F7 i can now compile that version without error's e…
-
Hi
where do I get information on what stepper driver ICs are supported/tested by the current Marlin AVR 8 Bit branch or which requirements they have to meet to work?
Thanks
-
Hi,
first and foremost I would like to bring this issue to attention where we can track it all together properly. Discord doesn't seem the right place for me as messages and focused discussions get o…
-
There is a board on ESP32. Compiled the firmware based on Marlin 2.0.9 and Esp3dlib. But there is no connection between the WEB interface and the firmware. A similar GR BL firmware works on this boar…
-
HTTPSConnectionPool(host='dl.registry.nm1.platformio.org', port=443): Max retries exceeded with url: /examples/26/4c/952336c9a92b81be05202ed0a03453c44d390f4062b2af61c8a87bb71d64/StallGuard_TMC2660.ino…
-
Description:
On my Prusa I3 clone which I changed from 8bit to 32bit with bigtreetech SKR1.4 with Bigtreetech TMC2209 v1.2 on Marlin 2.0.c from 06.09.2011 senssorless homing is not working . Chang…
-
With latest bugfox-2.0.x TMC drivers conditions seems changed and now bans MONITOR_DRIVER_STATUS for tmc2660
```
error: #error "MONITOR_DRIVER_STATUS requires at least one TMC2130 or TMC2208."
#err…
-
I have an LPC1769 with TMC2660 drivers (this includes the extruder motor). Everything works fine but when I enable Linear Advance, the extruder motor does not turn anymore. I can hear it being enabled…
-
### Description
Compilation error when #define X_DRIVER_TYPE TMC2660 in configuration.h (for all axes)>
### Steps to Reproduce
1. Use Azteeg X5GT or Ender 3 example configuration.h & con…
-
I made a board with an LPC1769 in combination with TMC2660 drivers (REARM pinning). After debugging I found that the enable lines of the drivers do not get pulled to GND to enable.
When I connect…