-
I'm trying to obtain a Rinex broadcast ephemeris file to use instead of downloaded brdc.
I record RAWX messages from u-Center (connected to a U-blox MT8 receiver) for one hour.
Then I use RTKCONV …
-
-
For the record: Testing on a Raspberry Pi 3 with Jessie and a Hologram Nova (u-blox) USB modem, changing the device from _/dev/ttyUSB0_ to _/dev/ttyACM0_ in https://github.com/twilio/wireless-ppp-scri…
-
As you can see the UDP Timeout is 3 Minutes. That's far too long and needs to be changeable. If the message isn't transferred within a few seconds it'll never be transferred successfully.
00:32:37.…
-
`UBX-RXM-COR`: Differential correction input status
`UBX-RXM-RTCM`: RTCM input status
These two messages give visibility into the RTCM input status. This would be very useful during debugging or c…
-
https://github.com/u-blox/cellular/blob/d2d4315335ad75e3bb7a13398817df6974fae94d/ctrl/api/cellular_ctrl.h#L213
Not sure how to do this in C, but in OOP you would 'inject' the UART dependency and ma…
-
The #include in port\platform\platformio\arduino\app.iso is missing.
Could you please include it?
-
Hi, and thank you for producing the Astroberry Server. It has been a great addition to my astrophotography rig. I love being able to sit inside the nice warm house and connect to it wirelessly on cold…
-
Hi all. Does anyone know an NB-IoT device that is compatible with this software?
-
RoscoePi works properly with the Stratux Vk-162 Remote (external) Mount USB GPS receiver but does not work with the Stratux GPYes 2.0 u-blox 8 GPS (internal) unit. Most if not all of the prebuilt St…