-
### The problem
Today I updated to Unifi OS 4.0.3 and noticed that the integration wanted to re-auth. I tried without success and reinstalled the integration. But even after that I can only see err…
-
### The problem
It seems unifi discovery is polling the Gateway IP adress 172.16.0.1 when this address is a router that is NONE Unifi. My unifi network server is running on IP 172.16.0.205.
Unifi …
-
Just in case others run into this. Unifi OS 4.03 is released by Ubiquiti as Early Access. If used together with Home Assistant latest (2024.05b3) the integration won't load. This may not come as a sur…
-
### The problem
WIth Unifi Protect v2.11.21 on Cloud Key+ running UnifiOS 3.2.10 and UP Floodlight Firmware v1.12.0
HomeAssistant Container 2024.2.1
Since updating from 2024.1.6 I can no longer p…
TazUk updated
4 months ago
-
### Camera
Frigate
### Firmware version of the camera
_No response_
### Description
RTSP camera feed configured with Frigate.
Detections are working within Protect and displaying the correct t…
-
### The problem
As related to my request for support from the forum's here: https://community.home-assistant.io/t/media-cast-dlna-not-working-with-samsung-tvs-or-smart-monitors/693075, I have done …
-
### The problem
Good day.
I've been using the integration for a while now and not had any issues. I accidently installed a early access version of protect which broke the integration. However n…
-
### The problem
Initially new Live Views were added to the ViewPort attached to the NVR configured in the unifiprotect integration.
Subsequently, the Home Assistant server was restarted to imp…
-
**Describe the bug**
Unifi object detections aren't shown in device groups.
**To Reproduce**
Steps to reproduce the behavior:
1. Create new device group
2. Add `Camera`, `Intercom`, `MotionSens…
-
I just setup BirdNet-Go in a container and I configured it to listen to four Unifi Protect cameras and it was working great until it crashed with the following error. This is with the `latest` contain…
jdoss updated
4 hours ago