-
As discovered in #4958, the test above fails on rpi like follows.
```
[init -> usb_drv -> usb_drv] usb 1-1.3: USB disconnect, device number 63
[init -> usb_hid_drv] usb usb-1-63: USB disconnect, …
-
If the HID-Button-ATTiny85 is already attached to an USB port before the PC is fully started it will not be recognized.
__Remark:__ unknown if this can be fixed because this might be an issue of th…
-
### Describe the bug
Today at about 9 UTC, my Cudy WR2100 stopped transmitting traffic on the wan port after about 2 days uptime (without any outside interference). Other ethernet ports also don't wo…
-
I regularly use my Flipper Zero when I have to control devices, that don't have an attached keyboard, but I need to press some button e.g. to get into a setup menu. Therefore I connect the flipper usi…
-
hello is it possible to read a hid temperature sensor with lm sensor ? Unfortunately it is not recognized in my case.
I used this controller. THANKS!
https://www.led-genial.de/USB-Temperatur-Sen…
-
### The problem you're addressing (if any)
- [ ] `USB001.001 USB devices detected in FW` only works with PiKVM
- [ ] https://github.com/Dasharo/open-source-firmware-validation/issues/87
- [x] htt…
-
I'm trying to setup an STM32 Bluepill as a USB keyboard.
In the Arduino IDE the settings in Tools are:
![image](https://user-images.githubusercontent.com/6318138/78912764-e8990880-7a7f-11ea-8f2a-d1d…
-
USB2.0 is affordable and ubiquitous, with peripherals ranging from HIDs to webcams, and more. However, FPGAs typically don't have a good way of direct interfacing to USB (with a notable exception of G…
-
When the device is connected, there is a segfault and it crashes a current window session. It seems like it crashes the entire USB stack actually.
uname -a:
`Linux [hostname] 6.6.8-2-MANJARO #1 SM…
-
So I've been reading through a ton of this repo, and it's amazing BTW, and I keep reading what seems like conflicting information.
Can anyone outright confirm/deny that joy-cons with a charging gri…