-
### The problem
I have a problem with d1_mini board v.3 and Dallas sensor cooperation. Unfortunately, the results are very inconsistent. Sometimes I can see the sensor in logs, sometimes not. Failure…
-
I would like to be able to measure water level, or tank level of a dispenser. These e-tapes are pretty popular and provided a resistance level that the REM can read from MegaBas card.
https://ww…
-
### The problem
When a high flow alert is triggered, the state does not auto turn off, nor is it possible to turn off or clear the state of the sensor in Home Assistant. The only way to get it to c…
-
When using the dynamic line color on my installation (fully up to date as of 2.6.2024) the coloring of the line stops working when the sensor value is over the color threshold. Instead of the highest …
-
## Rig
- [x] Rig ID uses YYYYMMDD, not YYYY_MM_DD
- [x] Tube manufacturer should be CUSTOM or OTHER, not null
- [x] Motorized stage needs a model name
- [x] Reward spouts needs a manufacturer. CUS…
-
**Describe the problem you have/What new integration you would like**
Energy meters often provide their measured energy consumption in integers, even many of those, that measure fractional values…
-
### The problem
I configured the Puls Meter Sensor for a TCR5000 infrared device to count the revolutions of a water meter with a reflective area (nearly a half circle) on the 0.001 m^3 pointer (one …
-
I found some really helpful articles on pool chemistry which pointed me towards the need for an [ORP sensor](https://www.dfrobot.com/product-1071.html). This will allow me to measure my chlorine level…
-
We only published surface water salinity. Users of the data would like the conductivity data published as well.
-
It would be nice to have all the data available in the telegram also be available as a sensor in Home Assistant for the Hydrus water meter.
Currently, only the `total_water_m3` is supported.
But …