-
Any tips on SWD flashing a standard Silabs bootloader FW on Ebyte E180-ZG120B-TB evaluation board and E180-ZG120B module?
* https://www.cnx-software.com/2020/04/27/ebyte-e180-zg120b-tb-zigbee-3-0-e…
Hedda updated
3 years ago
-
Is it a strange idea to support ZMODEM passthrough via a service in the event interface? I still think of it as a highly useful protocol, but it is ancient... so, to refresh your memory:
* ZMODE…
-
https://github.com/RT-Thread/rt-thread/pull/4503
-
シリアル接続でZMODEM転送を実施すると、
送信・受信共にCRC異常で転送に失敗してしまいます。
接続先のZMODEMプロトコルの仕組みは自作のものですが、
(申し訳有りませんが、開示することはできません。)
TeraTermからZMODEM転送を実施した場合は送信・受信共に正常に転送できています。
Teraternの設定は特にカスタマイズせずに使用しています。
TeraTe…
-
I decided to try installing openipc on my old Foscam (FI9821W V2.1, HI3518CV100). While following through the instructions, I made it as far as flashing the u-boot image (https://github.com/OpenIPC/f…
-
Hello,
I am wondering if there is a possibility to stream the video and when a GPIO pin triggers, to take an image and send the image via the USB? How one might develop this?
-
I have the Nortek HUSBZB-1 USB adapter connected to my machine but I am getting the error "ImportError: No module named serial". I can see it on /dev/ttyUSB1 but when I run the ncp.py scan script, i …
-
It's quite possible to do an efficient rolling CRC. Let me know if you're interested in help with that. I could help with the mathematical theory, and practical implementations.
-
**The problem/use-case that the feature addresses**
Sometimes I would like to see which slot a key should belong to without actually adding it. So I think such a feature would be helpful.
I am s…
-