-
I am using :
- development branch
- CC1101 : https://www.aliexpress.com/item/33059343309.html
- ESP32-WROOM-32D DevkitC_v4
- Power by USB. Power the module via the 3v3 pin on the ESP32 : is it ho…
-
### Steps to reproduce
1.hackrf one transmit the continuous square wave signal in 433MHz
2.other hackrf one receive the above signal through antenna
3.Theoretically,rx will get the continuous s…
-
Update between v0.1.7 and v0.1.8 breaks readout from Silvercrest RollingCode-RemoteControl (was formerly recognized as Smoke-GS558)
i fiddled down the problem to a change in pulse_demod.c
https:…
-
### Describe the bug.
Hi!
I'm generating a raw sub file and when I play it with my flipper, it starts with some kind of preamble which I didn't write into the raw sub file:
- unwanted preamble
…
-
**EDIT:** **Turns out that this sensor is a V2 and due to that, has actually nothing to do with the Maverick, so it will likely require a new decoder. So the first few posts contain some erroneous ass…
-
Hello.
I'm trying to implement an RF project to use 32 bit 433mhz RF.
I'm using this RF module:
[433 MHz Module---.pdf](https://github.com/leech001/RF-BARRIER/files/10094956/433.MHz.Module---.pd…
-
Ich wollte in verbindung mit dem SignalDuino folgende 433Mhz lernfähige Fernbedienungen benutzen:
[Ebay](https://www.ebay.de/itm/374316392976?_trkparms=amclksrc%3DITM%26aid%3D777008%26algo%3DPERSONAL…
-
Hello everybody,
I am trying to test my 433Mhz garage remote, and i would like to study the RSSI and LQI coverage. I have a Yard Stick One configured with my signal parameters and i receive the key…
-
I searched around, but was somewhat surprised to only find [this issue](https://github.com/1technophile/OpenMQTTGateway/issues/32) discussing possibility of nRF24 / MySensors support, where it seems y…
-
Hi,
I have two E220's connected to two Atmega328Ps, they were working just fine, but just recently, instead of sending one transmission every 10 minutes, it sends three at the same time, I've verif…