-
Apparently there is now a low power library for the Primo (nrf52) from the folks at arduino.org. Not sure how difficult it would be to get that working with this repo: https://github.com/arduino-libra…
-
I've just finished making one of these :)
It is based on an AZ Delivery WROOM-32 Dev Kit v4 board, which I added to my platformio.ini
```
[platformio]
default_envs =
esp32dev
esp32doit-devk…
-
Hi
I have a device I am trying to emulate and in Wireshark scan response and advertising response it shows as having TxAdd: RANDOM with address 0xdb, 0xab, 0x7f, 0xe0, 0x2f, 0x5c.
How can I change …
-
This is a new version of the already-supported Arduino Nano 33 BLE Sense. I opened this issue to discuss the now discontinued Rev 1, but I repurposed it for the Rev 2 after figuring out that all the p…
-
### Board
ESP32 Wrover Module
### Device Description
ESP32 WROVER - E
### Hardware Configuration
Nothing relevant
### Version
v2.0.9
### IDE Name
Arduino IDE
### Operatin…
-
After messing around with the auruino-pico I thought I was doing something weird, however I found that if you pair it everything will work as intended. But if you unpair it from the same device and tr…
-
Hello,
in past i wrote private lib based on BlueMagic32 (but used only the connection part) to create bridge between BLE and Websocket.
My target was very simple, pass all data (including connecti…
-
### Subject of the issue
using "Conf WiFi", the displayed web form does not display stored/retrieved value for Ethernet HTTP Port (should be default 80) - it is empty. Even if not changing "Ethernet …
-
### Controller Board
FluidNC Pen Laser Controller (SPI)
### Machine Description
Feungsake 4040 Laser Engraver with 4W PWM Laser Module
### Input Circuits
_No response_
### Configuration file
``…
-
I strongly recommend adding BLE mesh, which is found in ESP-IDF, but it is troublesome to install this software. As a novice, I use arduino a lot, but there are no ble mesh examples in The Arduino. Co…