-
On Windows the command line might be to long and the default behavior of ninja/compilers is to use response files.
CCache supports response files with the @file syntax. Would it be possible to make…
-
**Describe the bug**
If I shutdown the pi (in my case, a Pi0), and boot after the clean shutdown, the `disable_overscan=1` setting in config.txt is respected.
If I "pull the plug" on the pi and then…
-
ESP32c3 was working fine in my yocto image. When I added docker service in my image then as soon as I run this command insmod esp32_spi.ko resetpin=297
my board goes into kernel panic mode
-
*(This first comment will be updated as the porting efforts evolve and will summarize results so that others can benefit from it.)*
Hi @alexforencich and all,
First off, congrats for an impr…
-
**Describe the bug**
We are experiencing a very similar issue as https://github.com/raspberrypi/libcamera-apps/issues/270. There is only one difference: the solution does not work :cry:.
So the…
-
I followed the tutorial at https://github.com/seL4/camkes-vm-examples and tried to use qemu to simulate the environment of arm64 to run sel4 and start the linux virtual machine. At present, the single…
-
- SOC: [S905L2]
**Armbian Version | 23.02.0**
- Kernel Version: [5.15.95]
- Release: [jammy]
**Describe the bug | 问题描述**
MGV2000,可以启动,可以刷入EMMC,有线网口无法使用
尝试过5.15.91和5.15.95,DTB试过meson-g…
-
Hi, I've built a `petalinux` project with basic MPSoC block configuration for vitis support.
I'm facing the following error while booting the board.
```
device_remove: Device 'mmc@ff160000.blk' f…
-
**Device Information | 设备信息**
- SOC: [Allqinner H6]
- Model [TQC-A01]
**Armbian Version | 系统版本**
- Kernel Version: [5.15.93]
- Release: [jammy]
U-Boot 日志
```bash
U-Boot 2021.04-armb…
-
**Describe the bug**
Using 5.10 and associated firmware, the following error occurs during some boots. When the error occurs, the 5647 camera module is unusable.
The frequency of the error appe…