-
Need to add support for interrupts. This can done by checking whether an interrupt is triggered before executing an instruction, and the Global Interrupt Enable flag is set.
-
# Getting rotary encoders working with an Arduino Uno
I’ve been doing a bunch of stuff with an Arduino Unorecently. In particular, one of those things is trying to get anincremental rotary encoder(in…
-
I tested ALL pins of my MEGA2560 and there is no output at all.
How can I test this?
-
i have connected my esc (xxd hw30a) to my arduino uno and i want to flash it so it can go in reverse too. When i go to make interfaces, choose the board, click on arduino blheli bootloader and then up…
-
Hey folks!
It's been a while since there was activity on this project, stillI figured it would still be worth a shot to post my problem:
I want to "convert" my old toy-grade controller to a Sim-Cont…
-
I have noticed that after a few hours/days uptime on my emulated devices (and all my "real" devices) are lost in OWFS. They simply are no longer listed, and a power toggle of the master RPI is needed …
-
```
What steps will reproduce the problem?
1. Install recent Arduino IDE (mentioned in summary)
2. Install arduino-tiny as described in readme.txt of arduino-tiny
3. Create boards.txt from proposed bo…
-
```
What steps will reproduce the problem?
1. Install recent Arduino IDE (mentioned in summary)
2. Install arduino-tiny as described in readme.txt of arduino-tiny
3. Create boards.txt from proposed bo…
-
Reads 25MHz with timerMs = 1000 and 100. Other values corrupts the value of frequency.
#include "FreqCountESP.h"
void setup()
{
int inputPin = 14;
int timerMs = 100;
FreqCountESP.begin(i…
-
I knew I'd have issues while trying to upload my code using Pro Mico as UPDI programmer, but I didn't think I'd have issues programming the programmer itself!
While compiling in Arduino IDE 1.8 for a…