-
### Problem Description
Hi all,
I just tested the library today in a hurry and I just use a old board that I developped a few years ago.
This board uses a ESP32-WROOM32D module and I soldered a…
-
Do you plan to publish the source code? And is it in the Arduino IDE or the IDF?
-
# 电气工程术语表 Glossary of Electrical Engineering Terms
>https://www.analog.com/cn/design-center/glossary.html
| 英文术语 | 中文术语 | 解释 |
| --- | --- | --- |
| sigma-delta | Σ-Δ | 一种模/数转换器(ADC)架构,由1位ADC…
-
it is not an issue, but a request. Do you have the schematic you used? Can you share it?
-
I'll try my best to explain this, the beta firmware you've provided, unless I've missed something, doesn't have the BigTreeTech 32 bit SKR V2.0 board, so I had to download the newest 2.0.9.2 marlin fi…
-
Adding an option to play tone will allow users to practice and communicate like CW (using International Morse) in addition to practicing and communicating in Land-Line (using American and Sounder).
…
-
I made a post in the main branch of [Marlin](https://github.com/MarlinFirmware/Marlin/issues/22996) & another user [here](https://github.com/bigtreetech/SKR-2/issues/96) has a similar issue.
What I…
-
Currently the output volume seems to be very high at the moment and the master volume setting stops at a value of 10 not 0.
I'm not across I2S or how the PCM5102 is controlled, but I guess either t…
maks updated
7 months ago
-
Hello everyone,
I need Bose amplifier wiring diagram for retrofit to R-Link 2 unit. Also, I am looking for amplifier activation on ddt4all. Anybody knows how can I do?
Thanks
-
I made a loudspeaker library for amplifier testing. It is based on an article popular at diyAudio.
First entry is a 2-way 8-Ohm. It presents a real-life reactive load to the amplifier.
![2023-1…