-
Hello!
I can't get my LED panel to work as it should. I did the pattern test you see in the video: https://www.youtube.com/watch?v=a8-nj3kZqoM&t=10s
I also run Pixel time:
https: //www.youtube.com…
-
Hello Dear esp-link community
first im running Windows 10,
i bought this board and i would like to use esp-link so I can OTA update the ATmega2560.
Wemos Mega: https://www.banggood.com/Geekcrei…
-
### Basic Infos
#### Hardware
Hardware: ESP-12E
Core Version: 2.4.0
### Description
Yesterday i uploading my sketch and it worked very well. Today i tried to upload the exact same s…
-
So guys I have and ender 3 pro I bought this card and used on my printer . after that I bought https://www.banggood.com/1_75mm3_0mm-Fialment-0_4mm-Nozzle-Upgraded-Dual-Head-Extruder-Kit-for-3D-Printer…
-
Requirements :
- Range over 10m (~100m line of sight is good)
- Bi-directional
- Easy to integrate using standard Arduino boards
- As little RF work to do as possible (antennas, shielding, ...)…
-
Hi,
first of all thank you for your great work, my 3.5" touchscreen is working perfectly with X Windows.
In X windows, the display AND touch are perfectly working.
But when i try to use the touch-fe…
-
Been trying for 8 hours now to get these into my Conbee. Have tried following the advice on how to reset and pair from other threads here but with no luck. Have also tried to reset them via Touchlink …
-
According to http://www.diygoodies.org.ua/?p=417 the pinout should be the following:
```
TCK PA5
TDO PA6
TDI PA7
TMS PB14
NRST PB0
JRST PB1
```
-
Hi,
Attracted by the dictionary in ROM feature I am trying to
switch from punyforth to cforth.
So far, I found the following for an ESP-12F:
Under punyforth the GPIO numbers are the same as thei…
-
Hello, I ordered the following board of bangood and need help making sure I build and compile and also get the right firmware for the following.
`https://www.banggood.com/USB-Communication-Duplex-M…