-
Hello
When using dmesg command after plug in my controller, i thought i will see the polling rate applied but that’s not the case, is it normal ?
Regards
-
My multi-mode gateway 2 firmware version is 1.0.6.
I did not find my door lock model in **devices.py**, so I found a similar model with the following code:
# BLE devices can be supported …
-
Hi, I am new to bluetooth (especially BLE) but want to gather data from my new Cardiostrong Ergometer BX70i. Works perfect with the IOS App iConsole+ ... Other IOS BT sniffer work also.
My goal is t…
-
```
This is a request for BluezIME to support the recently released Onlive service
with other controllers possibly through emulation of the Onlive controller.
This is different from the request to s…
-
```
This is a request for BluezIME to support the recently released Onlive service
with other controllers possibly through emulation of the Onlive controller.
This is different from the request to s…
-
```
This is a request for BluezIME to support the recently released Onlive service
with other controllers possibly through emulation of the Onlive controller.
This is different from the request to s…
-
Is it possible to use this stack using H4 HCI protocol via SPI for connection to a Zephyr-based HCI_SPI controller?
I have checked hci_transport.h and based on hci_transport_config_type_t only USB …
-
This was originally requested in https://www.atari-forum.com/viewtopic.php?p=380358 and rejected by @sorgelig stating Atari 800 is a computer, hence keyboard is a prerequisite.
Hence MiSTer now pro…
-
[Screen Mirroring log 2d49d1a1ed48.txt](https://github.com/user-attachments/files/16116434/Screen.Mirroring.log.2d49d1a1ed48.txt)
Hey!
First of I want to thank you for this awesome project, I LOVE…
-
I am seeking help with a program to make a high frequency measurement and then report it out by a BLE connection. My current problem is that measurements are intermittently delayed.
The measurement c…