-
Checking to see if any display support is planned for the future?
I see great value in using OLED displays for non SONOFF devices, like WEMOS.
rlust updated
2 years ago
-
I used your code to read from a bmp280, but I kept getting strange values - I traced it back to the read16 function - it looks like the bytes were being read in reverse order?
https://github.com/xl…
-
**Describe the bug**
The following was reported by a HoverGames participant.
q: i recall a sensor bus choking issue. is that present in 1.9.2? and corrected in later versions?
[10/24 4:06 AM] M…
-
Hello
I would open an issue, because the actual ESPeasy Mega software does not support AHT10 humidity/temp sensors and I have a few of them and would use them with my standard firmware for ESP8266 ..…
-
https://github.com/lbernstone/UncleRus-drivers
This is a collection of drivers collected and maintained by [@UncleRus](https://github.com/UncleRus/esp-idf-lib) for ESP32. I only write the script t…
-
I have a Adafruit BMP280, operating via i2C. It's the only board connected to the Raspberry PI. When using the CircuitPython library, I get this error:
`RuntimeError: Failed to find BMP280! Chip ID…
-
Hello,
I'm using an BMP280 on TTGO TBEAM with GXAirCom version 4.8.0 via UDP connected to an Kobo with XCSoar
On the web-console I can see the pressure data but XCSOAR isn't able to interpret. I tr…
-
**Describe the bug**
variable-sized object 'parent' may not be initialized
**Set up (please complete the following information)**
- Adafruit_nRF52_Arduino version 0.20.1 - 2020.04.23
- OS (w…
-
### Subject of the issue
The problem is that RTC date and time set in the OLA via a terminal do not persist after the unit is powered down.
Investigation suggests that entering a month value between…
-
I have insert bmp280 and test.py into esp8266 board by using ampy.after I have tried 'ampy -p /dev/ttyUSB0 -b 115200 run test.py' but it is showing :
```
Traceback (most recent call last):
File "…