-
Cleanflight does not recognize the PPM stream coming from my DTF UHF receiver, but in Baseflight it works perfectly. I have it set to 12 channel PPM but the same problem occurs when it's set to 8-cha…
-
Could servo gimbal be allowed on tricopter? At least with one servo? Note: there are two outputs available - one "servo" and one "esc".
Genarally it would be nice to be able to map "gimbal" (and mot…
-
I can play them with INAV blackbox explorer but with mwp (latest build for "ancient" ubuntu) no.
It says no log in the files.
[LOG00352.TXT](https://github.com/stronnag/mwptools/files/1033685/L…
-
Just a thought...
It would be great to see Volts, Amps and Watts on the motor tab with a graph if possible.
Maybe even MAX calculated values above the individual sliders and a RESET button to zero t…
-
I flashed the latest build onto my Sparky board. The configurator allows enabling the RSSI ADC features, but the documentation doesn't indicate which pin to send the RSSI feed from my Frsky receiver.…
-
I have two of these with the same issue. I set the mode so I can have ARM on a switch (AUX 1). I hit save and sometimes it saves sometimes it does not.
Once it saves, later it will revert back to…
-
I am trying to use MSP as the wireless control and telemetry method.
I am able to arm my quadcopter by sending out raw rc values (aux1 for ARM) to FC continuously or get data from FC separately, b…
-
during early startup it has been observed that the mAhDrawn value is negative. This has a knock-on effect with the msp and telemetry code that require the value to be constrained by via constrain() c…
hydra updated
7 years ago
-
https://github.com/cleanflight/cleanflight/pull/2555
-
In use is a SPRacingF3OSD and a SPRacingF3EVO with the "Stackable Design". It is the latest CleanFlight version 1.14.2 installed on the SPRacingF3OSD and on the SPRacingF3EVO as well.
Stackable desig…