iNavFlight inav issues - Githubissues

iNavFlight / inav

INAV: Navigation-enabled flight control software

https://inavflight.github.io

GNU General Public License v3.0

3.21k stars 1.49k forks source link

issues

Newest

Newest Most commented Recently updated Oldest Least commented Least recently updated

Fix incorrect arming flags reporting on CLI

#10479 mmosca closed 3 days ago
1
gimbal_sensitivity uint8_t -> int8_t. Range is actually -16 to 15

#10478 mmosca closed 4 days ago
0
Enable USE_ADSB by default

#10477 mmosca closed 4 days ago
1
add target RADIOLINKF722

#10476 radiolinkW opened 4 days ago
4
Allow to adjust gimbal sensitivity with radio input when using Serial control of the gimbal instead of PWM control in INAV 8.0

#10475 jaroszmm opened 5 days ago
4
Adjusting sensitivity for Caddx GM series/ C-20T/C-20D gimbals with UART Control

#10474 jaroszmm closed 4 days ago
1
Bump version to 9.0.0

#10473 mmosca opened 6 days ago
0
Inav 7.1.2 GPS issues with FlyFishRC M10 Mini GPS Module

#10472 roroid opened 1 week ago
7
Geozone RC2 Fixes

#10471 Scavanger closed 1 week ago
1
inav configurator 7.1.2 does not show reason for navigation is not safe (cli same)

#10470 swissembedded closed 1 week ago
11
Add support for SKYSTARSSF405AIO target

#10469 DusKing1 closed 4 days ago
2
add annotated script to generate RN Changelog

#10468 stronnag closed 1 week ago
0
[Fix] EZ-Tune Filter-HZ Fix

#10467 Scavanger closed 1 week ago
1
Geozones.md

#10466 b14ckyy closed 1 week ago
5
Add MSP_OSD_CANVAS/MSP_SET_OSD_CANVAS for completeness

#10465 mmosca opened 1 week ago
0
[mspv2] pass "flags" field back to sender, define ILMI flag

#10464 stronnag closed 1 week ago
1
Keep arm status over MSP if in emergency re-arm period

#10462 MrD-RC opened 2 weeks ago
1
Revert change to MSP_SET_RAW_RC

#10461 MrD-RC closed 2 weeks ago
0
NEW target blueberryF405&blueberryF435

#10460 sunyanmeng963 opened 2 weeks ago
10
Geozones (aka Geofence)

#10459 Scavanger closed 1 week ago
34
Add spa06 and spl07 baro for Kakutef4/f7 FC

#10458 jamming closed 2 weeks ago
1
EZ-Tune: Filter Hz < 20 leads to Inavalid setting for smith_predictor_delay

#10457 Scavanger closed 1 week ago
0
OSD Freeze, Modes lost, no RTH

#10456 cooool39 closed 1 week ago
3
motors stop working while trying to take off

#10455 MohamedNour1452 closed 1 week ago
2
add TBS_LUCID_H7

#10454 bkleiner closed 1 week ago
8
RUSH_BLADE_F7, 7.1.2, quad, motors 3-4 don't operate

#10453 alexanderdzyuba closed 2 weeks ago
1
Initial implementation of MSP RC stats and info messages

#10451 MrD-RC closed 2 weeks ago
1
Have RSSI go from 0-100%, rather than 0-99%

#10450 MrD-RC closed 2 weeks ago
4
GEPRC_F722_AIO Missing UART 3

#10447 MrWeedx3 closed 5 days ago
1
Servo rotation on power-on

#10445 jhoppenstedt closed 1 week ago
3
Speedybee F405 AIO

#10444 DzikuVx closed 6 days ago
0
USB recogonized but Failed to open MSP connection on Debian 12 Linux

#10443 Kai2510 closed 3 weeks ago
2
The barometer integrated on GEPRC's GPS is not working - the solution

#10442 YI-BOYANG opened 3 weeks ago
2
Update DPS310 driver to support SPL07-003

#10441 DzikuVx closed 3 weeks ago
0
MSP DisplayPort add new video system

#10440 mmosca opened 3 weeks ago
0
New Firmware for MATEKF411SE_S6_SR1

#10439 alexvazquez closed 3 weeks ago
1
Update TUNERCF405 target.h

#10438 TUNERC-Aria closed 2 weeks ago
0
Set SafeHome point on the fly

#10437 DanielOBenson closed 4 weeks ago
3
accelerometer is not working accurately.

#10436 Lalbabu2001 closed 4 weeks ago
5
7.1.2 Plane cruise mode issue with changing altitude

#10435 jaroszmm opened 4 weeks ago
26
Request for Multirotor Autotune Functionality Similar to Ardupilot QuickTune

#10433 292445344 opened 4 weeks ago
1
Matek F411SE problem with analog airspeed

#10432 LazyPythonCoder closed 5 days ago
1
Failsafe not working.

#10434 Lalbabu2001 opened 1 month ago
2
Allow the pilot to set the precision for altitude and distance in the OSD

#10431 MrD-RC closed 4 weeks ago
0
Fix custom OSD elements cli import

#10430 MrD-RC closed 1 month ago
0
Add feature freeze announcement

#10429 mmosca closed 1 month ago
0
Change flight mode violently changes height

#10428 Normoa closed 1 month ago
3
Feature Request: Add Mavlink Guided Mode via MAV_CMD Handling

#10426 xznhj8129 opened 1 month ago
4
Add Guided mode handling to Mavlink telemetry

#10424 xznhj8129 opened 1 month ago
7
Added IMUTemperature read function for ICM42605

#10423 ultrazar closed 3 weeks ago
2