-
### Is there an existing issue for this feature request?
- [X] I have searched the existing issues
### Is your feature request related to a problem?
The popular use of elrs now makes the built-in R…
-
Hello Mstrens,
I found something in the HOTT protocol that doesn't match the "fields per protocol.txt".
V1 to V4 are activated.
1.63V are present at inputs V1 to V3,
and 2.3V are present at V4
T…
-
I have a friend used the RM receiver R161, and used the S.Port to send back telemetry, the included figures are from OpenTX 2.3.9 and compared to EdgeTX 2.6.0 released version, EdgeTX has a lot of sen…
-
-
### Describe the bug
set dshot_bitbang = OFF disables bidirectional dshot on FLYWOOF411. BF 4.3 RC4 flashed through 10.8 RC4.
### To Reproduce
enable bidirectional dshot and then set dshot_bitbang…
-
### Describe the bug
On the Configuration page I enable the GPS item, enable the necessary ports, save and after saving it is not enabled although on the Ports page I have enabled everything correctl…
-
### Describe the bug
On BF4.4 defaults, after arming motors go spinning like crazy (really fast).
### To Reproduce
On flight controller HAKRCF411D, after flashing BF4.4 motors spin erraticall…
-
**Issue details**
CRSF telemetry runs and stops with approx 5 second periods each.
This can be seem on the opentx transmitter telemetry and using a logic analyzer at the Ardupilot uart port.
Appea…
-
Please add it!
More info here
https://discuss.ardupilot.org/t/passthrough-telemetry-over-crsf-crossfire/62668
*Instead of commenting "I want this too", consider leaving a :+1: instead, to red…
RMFPV updated
2 years ago
-
### Describe the bug
After flashing to 4.4 I can't seem to get analog OSD to function. Flashing back to 4.2.5 or 4.2.11 (my previous version) it works perfectly again.
Things I have tried:
- Clou…