-
Hi Dan, Managed to get the core implemented without too much trouble and have (I think) a rudimentary python driver (gist [here](https://gist.github.com/baileyji/6cbd2e4ae473d6399efac261855860bb)) for…
-
Restrict channels for CN470 to the 8 uplink channels/8 downlink channels used by both the Helium Network and the things networks. Then set the max possible power for the radio, as the front end on th…
-
If the 8 demodulators are set to the same frequency I would expect 8 packets to be received from a single source.
In testing sometimes one packet is missing, other times only 2 will report packets.…
-
Hello, the question is in the title.
if I need to have a multicast traffic consumer inside the cluster but my traffic producer has to be outside the cluster but on the same physical network.
Will …
-
The problem I have is that the transmitter gives me a time out error, but still the transmission is done.
**Sketch that is causing the module fail**
Emisor
```c++
/*
RadioLib SX127x Transmit…
-
**Is your feature request related to a problem? Please describe.**
Support of AS923 frequency range
**Describe the solution you'd like**
LoRa starter kit should support AS 923 freq range
**Des…
-
Couldn't find any info
-
Hi, thanks for the new stack. I wanted to migrate away from the old udp-forwarder and tried basicstation, but it turned out that it only supports SPI communication and not the SPI over USB versions of…
-
When a confirmed uplink packet from a device in the production console is received by the light-gateway the downlink packet is dropped by the gateway. ```ERROR: Packet REJECTED, unsupported frequency …
-
Hello,
Thanks for providing this driver for free!
I was wondering if it would be possible to capture 4032x3040 @ 60fps on Jetson Nano.
As far as I understand, CSI-wise it would be possible, by …