-
I tested the TM1637 example sketch with a few different boards using STM32 series IC's. They are all 3.3V powered, so I also powered the TM1637 from the same 3.3V power. I used a somewhat arbitrary PB…
-
### Firmware
Your firmware version: 28th Aug v2.11.67
Your bootloader version: 5.0.4
### Hardware
Chinese made RS-918, brand new.
### Describe the issue:
50Mhz Tx initially works after…
-
Hi everybody
I have a Raspberry Pi 2 Model B Rev 1.1 and a TP-LINK TL-WN722N (EU) Ver.:3.20 (150 Mbps High Gain Wireless USB Adapter - White)
Installed:
OS: Kali Linux
Kernel: armv7l Linux 4.19…
-
@Insei Hi, Insei, I come to here again is to tell you that I got the TegraBoot messages from headphone port!!!
Its so cool~
It just happed after I bought a new USB2TTL connector to replace the …
-
Hello! First of all, thank you so much for sharing this project!
I'm trying to implement this project on the BeagleBone Black, and I'm running into an issue. I'm able to run the "dmx" application …
-
This is the crash report, as asked by the text. This was a local build of LLVM, from git, around a month ago. Most tests passed after the build, here are the few that didn't:
```
*******************…
R-Goc updated
1 month ago
-
every once in a while, nexmon dies with:
```
[ 4341.527847] brcmfmac: brcmf_cfg80211_nexmon_set_channel: Set Channel failed: chspec=4101, -110
[ 4344.327806] brcmfmac: brcmf_cfg80211_nexmon_set_c…
-
Resources:
- https://github.com/hansemro/kernel_omap_otter-common/blob/84763bbf0a9138cb0ba7b42411cd8d0405c1c684/arch/arm/mach-omap2/board-4430kc1-tablet.c#L592-L596
- https://github.com/hansemro/ker…
-
Hi again,
Long time passed but, as you might remember i rolled my own hardware based on your "15s80" and "switch n sense" in here: https://github.com/LibreSolar/bms-15s80-sc/issues/6
I solved all…
-
What is alacritty's RSS expected to be?
If I open a new terminal and run top, RSS is 54MB, but if I then hold ctrl- (top still running) until min font size is reached, then hit ctrl+ to restore fon…
ghost updated
3 weeks ago