-
Hey all,
I'm currently trying to use the ebus-HA-addon and in general It does what it should
I can see almost every information in HA and some values are also ready to edit.
But there are some …
svb91 updated
11 months ago
-
Hello,
this is a follow up for
#32 and https://github.com/john30/ebusd/issues/1117
I own 2 adapter v5, both connected via USB to a raspberry pi 3B running raspbian. I tried connecting them to my …
-
Hello Daniel.
I just applied the v6.1 update firmware file v3.x using espota.py
On successful completion of flash it did not auto reconnect to my wi-fi.
It was in reset mode so I could directly acc…
-
Hi! It's been a while since I last used your library. It has helped me a lot in the past. Recently, I wanted to use a script that I used to use a lot in the past, and always worked fine, and I kept ge…
-
User report:
if we define two bridges and put the same interface name into each clab panics.
Smth like
```yaml
- endpoints: ["node1:e1-48", "br-1:eth1"]
- endpoints: ["node1:e1-49", "br-2:eth…
hellt updated
10 months ago
-
### Description
Hi,
I managed to get the ebus adapter with the newest FW to work with HA and ebusd. When I try to read the bus, I only get the mentioned error.
I also tried different options with…
ghost updated
8 months ago
-
The current committed version [Mar 26, 2017 2b8b0860c18a5710f1f89bd723a952efc12b1fe7] of ebusd isn't answering to **scan telegrams** any more.
A previous version was working proper.
I'm using tw…
-
Stock display of the ecotec shows the currently used heating power using a small pictogram. I've tried to find the source register (something with either a power value or a percent value) in the bai r…
andig updated
7 months ago
-
Hello,
I've got an EVO192, and tried your great code, but of course, it won't work perfectly :)
(Of course it works fine at a friend of mine, who has a MG5050)
I modified the config, to skip the labe…
mnmn2 updated
4 years ago
-
**Describe the bug**
If `ed_enableDPE` is `true` then modifying *View Area Grid Size*, *Sector Point Density*, or *Sector Size In Meters* property in the *Vegetation System Settings* component causes…