-
Hi everyone, I have some problem. I working with CC1310F128 and SmartRF06EB with Instant Contiki. I would like to connect to 6lbr with ENC28J60. I tested a cetic_6lbr_router but on monitor serial, I d…
-
For the Due, Enc28J60Network.h defines ENC28J60_CONTROL_CS to BOARD_SPI_DEFAULT_SS which is defined as 78. But pin 78 isn't actually available on a header (see https://www.arduino.cc/en/Hacking/PinMap…
-
https://github.com/Hexxeh/rpi-firmware/commit/edd3e6c00078c2a8c28196030a7f2dd151c277e7 starts to boot on my original model Zero, gets lots of services starting messages but then the screen turns to a …
-
I am trying to convert your image to be installable by NOOBS/PINN.
If I remove the `/boot/autoexpand_root_partition` sentinel file as recommended then the raspberrypi64 password does not get set. In…
-
Hi,
Trying to get our BBB to wakeup from RTC using "mem" and its breaks on wakeup. Now we built a custom kernel, and I wondered if someone could help me deciper the error?
The following error o…
-
Wiki says
> W5100 shield (tested) or **other** ethernet module
I have enc28j60 ethernet module and trying to adapt the sketch to use UIPEthernet library. Hope I'm doing things right...
So, I'm …
-
i had this error could you help me
Arduino:1.8.1 (Windows 7), Tarjeta:"Arduino/Genuino Uno"
Opciones de compilación cambiadas, reconstruyendo todo
In file included from C:\Users\luis\Document…
-
Hello @Links2004 :)!
I would like using Ai Thinker A6 (GSM/GPRS) with this library instead of ESP8266 wifi client.
I can create a class with methods called equal as "wifi client class" using A6…
-
Hello,
I am running sucessfully the 6LBR Version : 1.5.x (Contiki-develop-20161222) in a cc1310 Launchpad + ENC28j60 ethernet adapter.
Just after the firmware upload, the 6LBR works perfectly, but …
-
After the building of the `devel` branch this evening; looking at the `tree` listing (see below) two odd things caught my eye.
First is the fact that some files were created in "The Future" and the …