-
Running each simulation to establish a baseline and to verify reproducible results. In the single family prototypes ran into the following errors. Also ran into multiple errors in the mobile home prot…
-
i was trying to create a customized building environment, i have added my file configuration but it still says cannot find the environment
![image](https://github.com/ugr-sail/sinergym/assets/38762…
-
Issue overview
--------------
I've seen recently students receiving issue with the results as it does not show up properly.
## Current Behavior
This page shows up:
I did not get a chance…
-
Issue overview
--------------
The actuated component unique name of EMS:Actuator objects in EnergyPlus is determined by OS during the forward translation process. The name appears to be based on the…
-
Issue overview
--------------
Hello, I am used to work with ZoneHVAC:OutdoorAirUnit objects, and I needed for a project to convert it into a AirLoopHVAC in order to handle dehumidification.
I trie…
-
Englander and Norford (1992a) noticed for fans controlled to a constant static pressure setpoint with VSD retrofits, measurements of power as a function of measured flow P(V) did not trend towards the…
-
The opaque surface type is identified based on tilt angle logic in the RCT, however, the logic is oversimplified that could result in many mis-identifications.
In small office case, Attic_Floor_Cor…
-
Issue overview
--------------
In the attached EnergyPlus example with VRF system object "AirConditioner:VariableRefrigerantFlow", I found the output variable VRF Heat Pump COP is very low and Electr…
-
**ISSUE 1: zone to space translation**
**Summary:**
Recent versions of EnergyPlus added Space objects. Some objects attached to a zone get attached to a space upon OpenStudio translation to EnergyP…
-
What needs to be done:
- [ ] Create an AHU model with the system configuration currently implemented in `Buildings.Examples.VAVReheat.Guideline36` and conforming with Linkage template structure ill…