-
Hi!
Great work with the firmware and Web-UI.
I want to modify the web interface a bit to complement with my printer's theme. How can I build my web into .gz file? I saw the index.html.gz file and it…
-
![image](https://user-images.githubusercontent.com/8822552/37558909-12e60c3e-2a1c-11e8-837a-43e9651608cb.png)
space of 655.61KB is wrong need to remove the size of existing sketch 364.35KB = 291.26K…
-
Use the upload function of ESP and M28 function of repetier by serial
-
ESP has a HW buffer of 128 bytes when post buffer is 2048- so just doing a pass through crash the board due to overload buffer on repetier and smoothie.
also transfert between smoothie / repetier and …
-
use correct % of progression instead of generic progress bar
-
Admin should access to all wifi and printer
User should access to printer only
Gues should access to home only
-
allows with a command like [ESP700] to send all commands included in stored in SPIFFS
like :
park.g => G28 X Y : go to park
stopmotors.g => M84 : disable all motors
macro1.g => G112 : emergency sto…
-
even the command is commented the command is executed
need to ignore any esp command if commented by ';'
-
When editing STA or AP settings, or even change user password, the password is embedded to the form before submission - instead it would be safer to only send 8 starts like ********
so if still have …
-
if fw give some output with " it corrupt the status
`,{"line":"enqueueing "M84 X Y Z E""},{"line":"Now fresh file: /M4.G"},`
need to remove all " from output to avoid issue