-
Hello everyone,
I am new to CMake and to C++ in general and I wanted to compile CuraEngine to generate any Gcode file and get familiar with the whole environment. I am on Windows 7 professional 64-b…
-
I will gladly wait a few more seconds for the gcode to be generated if I can get X seconds back with an optimized Gcode (for batches with more than one run)
http://xyzbots.com/gcode-optimizer/
There…
-
I hooked up some drivers to my bambino 210E board to start testing the firmware step generation.
When I send a G0/1 command the firmwares stops responding and the motors are blocked but do not move.
…
-
I'm testing out Mattercontrol 1.1.3 (On OSX) with a Flashforge CreatorX.
I added my custom gcode that starts the extruders/temperatures etc. If I export the file as gcode, I see my custom gode at t…
-
I have tested my firmware config with both M572 activated and deactivated, it seems to cause steps to be lost in the XY when turned on.
Please let me know if I can send any info to help diagnose the …
-
We stumbled on strange noise from the steppers for some particular GCode files generated by the KISSlicer. With the help of a logic analyzer we tracked down the root cause the noise to an error in the…
-
The frontend communicates with serial connected boards via the node server (as middle tier), but with ethernet connected boards the communication is directly between frontend and controller board. Thi…
-
Are there any plans to add support for multiple drives per axis?
I am asking because the Duet only has one socket for the Z-axis which often requires 2, if you don't want to solder 2 motor leads toget…
-
I am in the process of testing LaserWeb and am choosing the controller firmware had hardware, however there do not seem to be any clear directions yet.
Based on tickets support for Marlin/Smoothiewa…
-
Open a large image, like a HD photo in jpg, png.
Generate raster and keep track of the browser's memory usage - it will grow with GBs when the path rendering is created. For a large enough photo the b…