-
### Prerequisites
* [X] Saswell SEA801-Zigbee/SEA802-Zigbee
* [x] Output from Home Assistant Developer Tools state e.g.
* [x] Output from Home Assistant Device Diagnostic from BT
```json
{
…
-
I saw your design on Hackaday (https://hackaday.com/2020/04/08/what-day-is-it/) and was immediately inspired by your work. I wanted to continue on that path and added a temperature/humidity sensor an…
-
Hello folks,
the tempered package I installed actually is functioning because I could do all utils and examples code for this one, all work.
http://goods.ruten.com.tw/item/show?21439300929462
But I…
-
On start I need to say - a very great job! :)
It would be great if we could aggregate sensor readings from different Pi servers in this project.
So that the temperature and humidity shows on top lik…
-
[AC.txt](https://github.com/hunterjm/ac-infinity-hacs/files/13537483/AC.txt)
Dont know where to put this Thread, so here it is.
Feel free to move like you wish.
I createt an automation based o…
-
#include
#include "DFRobot_RTU.h"
#include
#define SENSOR_ID 1 // Sensörün Modbus ID'si
#define START_ADDRESS 1 // Başlangıç register adresi
#define NUM_REGISTERS 2 // Okunacak register sayıs…
-
Hi,
I'm running Octoprint on a mini PC so I can't use temperatures sensor connected to gpio. On the other hand I have near printer esp8266 sending room temperature to domoticz home automation and I c…
-
Would it be possible to add dew point to the graph? This has a couple of big advantages: first, it is much more intuitive than relative humidity, and less coupled with temperature. Second, it has the…
-
Hi!
I have an ESP32 Dev Kit C (https://www.az-delivery.de/en/blogs/azdelivery-blog-fur-arduino-und-raspberry-pi/das-zehnte-tuerchen) from azdelivery , I wanted to connect it to a CC1101 module the …
-
There are now CO2 sensors that also report T&RH. Our database model can't handle this elegantly. Currently we simply ignore the T&RH data, because we consider the sensor to be a CO2 sensor. We could f…