-
### Problem Description
While trying to build, having a certain number of errors:
```
In file included from .pio/libdeps/esp32-s3-devkitc-1/audio-tools/src/AudioLibs/AudioSourceSDMMC.h:5,
…
olup updated
8 months ago
-
### Target name(s)
ESP32_REV3
### Firmware version
1.9.0.976
### Was working before? On which version?
1.9.0.970
### Device capabilities
System Information
HAL build info: nanoCLR running @ ES…
-
First of all: Thanks for all the work that has already been done to this project!
I'm trying to compile the current release of speeduino for stm32 targets (bluepill_f103c8 and generic). After downl…
-
I have started to look at spi-bcm2835 and DMA. My FBTFT drivers are now included in raspberrypi/linux, but I need a DMA SPI driver there as well, so I can stop releasing my custom kernel.
To get DMA c…
notro updated
9 years ago
-
Currently the output volume seems to be very high at the moment and the master volume setting stops at a value of 10 not 0.
I'm not across I2S or how the PCM5102 is controlled, but I guess either t…
maks updated
8 months ago
-
### Board
DOIT ESP32 Devkit V1, WEMOS LOLON32 Lite, Wemos D1 R32
### Device Description
All hardware plain on breadboard
### Hardware Configuration
INMP441_WS connected to D15
INMP441_…
-
I need to TX a large burst of (lidar) data inside a non blocking project.
The Arduino core code contains a nice little round robin data buffer where you can keep throwing data at it and the arduino…
-
### Answers checklist.
- [X] I have read the documentation [ESP-IDF Programming Guide](https://docs.espressif.com/projects/esp-idf/en/latest/) and the issue is not addressed there.
- [X] I have updat…
-
### Describe the bug
Cannot toggle GPIO Pins
### Preliminary Information
1. **Firmware Version**: 1613 (Special Edition from Artefacts with GPIO Control!)
### Hardware Details
WaveShare …
-
Dear @pschatzmann ,
thank you very much for this library and the additional documentation!
Regarding this board:
https://github.com/pschatzmann/ESP32-A2DP/wiki/External-DAC#pcm5102-dac
I've …