-
I'm attempting to compile the included demos and get errors on both demos.
Cloned `htcw_wio_terminal`, then created directory `ds2` and copied the files in `examples/demos` into `ds2`. Installed …
-
Using the instructions I installed the tools and the sming source. I changed to the Basic_Blink folder to try to run the sample and executed 'make'
The script ran and downloaded a couple of submodu…
-
Hallo Wolle,
vorab möchte ich sagen das ich dein Projekt Top finde und diene Realisierung auch sehr schön aussieht.
Ich hatte vor ein paar Tagen das Projekt kompiliert und es funktionierte tadello…
-
When the rev.3 hardware is run from battery the remote sometimes (probably) does not initialize the LCD correctly. The result is that the backlight is lit but the screen is blank. The user-led pulses …
-
### The problem
Hi,
I cannot get the TFT display to work with the D1 mini via ESPHome,
I can flash both OpenHASP and a ILI9341 demo script to the D1 and successfully get the display to output but t…
-
# :rocket: Please describe your feature request
* touch IRQ pin is already wired and have to be programmed
* currently the touch detection is looped in each cycle. This costs a lot of cpu load
* t…
-
**Carefully written Issues are more likely to be given priority.**
**丁寧に記述された報告は優先して対応される可能性が高くなります。**
## Environment ( 実行環境 )
- MCU or Board name: RPi2040
- Panel Driver IC: ILI9341
- Bu…
-
Hi !
My ILI9341 display works, but only during the initialization code. When I reset the device, the display flashes to reset, then displays SqueezeESP32, and that's it.
Display: ILI9341 2.8" SP…
-
### Perform all steps below and tick them with [x]
- [ ] Check the related part of the [Documentation](https://www.openhasp.com/)
- [ ] Update openHASP to the latest version
- [ ] Reproduce the iss…
-
I am using Visual Studio for the CYD, and I have the screen working with the following build flags:
build_flags =
-D USER_SETUP_LOADED
-D ILI9341_2_DRIVER
-D TFT_MISO=12
-D TFT_MO…