-
Hi,
I'm trying to generate an SoC with Chipyard and then pass the design to OpenLane for automated RTL-to-GDS.
I'm running the simulation for the example RocketConfig and then attempting to use …
-
i use klipper and suddenly no communication between gtr cards and raspberry pi. my card is no longer detected in usb on my pi. i tried to flash my card with an sd card , but nothing. i tried with an s…
-
Hi,
I see you made a little maintenance routine (core1_code) to run on core1. In comments you wrote "Most of the time this loop is stalled with wfes (wait for events)". It might be useful to leave …
mfp20 updated
5 months ago
-
To build OpenOCD for several platforms (Windows, Linux, MacOS), I use the xPack (https://xpack.github.io/) build scripts. The build procedure with xPack for OpenOCD is described here:
https://xpack.g…
-
There is this [nice tutorial](https://github.com/seemoo-lab/openhaystack/issues/35) how to transfer the .bin to the nrf51 device, but I fail at step 7. I get the error:
```
openocd -f /usr/local/s…
-
**_Reported by Jie Zhou:_**
Hello,
I'm switching boards from arduino 101 to tinyTILE, the flashing method for tinyTILE is different than the arduino. Below are the commands I used for arduino flas…
-
Dear @cpq @novlean,
Thanks for your great efforts.
My code was running perfectly with Mdash V1.2.14 & the esp-Arduino V1.0.6.
Recently, I have upgraded the esp-Arduino version from V1.0.6 to V…
-
If I would like to work on this board with Vivado, shall I install the board files?
If yes, where can I get it?
-
Few points to include in a new software:
- System image build system based on Omega 2S OpenWRT distribution. I'd suggest this instead of distribution only an application so that we have more'n'less…
-
考虑到Power Quality Analyser 项目需求,先快速制作Ver0.0 版本,并实现
1. Ethernet支持
2. SDMMC支持
3. 烧写/调试接口( JTAG / JLINK)
4. 电源管理 / B2B连接器选型
5. 高精度电压基准
后续迭代版本会支持 FMC(参考文档Flexible memory controller) 外扩 SDRAM 和 N…
CNLHC updated
5 years ago