-
-
Sometimes simuvex can not detect the correct jumpkind for arm binary. @ltfish @zardus
A small case:
```
In [23]: b = p.factory.block(0x300D14, insn_bytes='20509de524109de568809fe51ce09de5a7fff…
-
Create the lifter subsystem with the following directives
Normal mode:
Calibrate
Go to a given height (invalid if not calibrated, invalid if in low gearn)
Set the lifter to low gear
Set the lif…
-
I broke 4 lifter rods trying to join them together. I'm back to 0/4 lifter rods that I can use after a full day of printing. There is not enough clearance to fit the rod into another rod. I even tr…
-
https://tidelift.com/docs/lifting/security-process
-
When I use diffy to test, I found when response includes content type 'text/plain', the diffy would not handle the response and got following error log:
```
D 0108 07:01:08.812 THREAD39: success n…
-
Probably either `All_Sub_Trm_Occ` or `Some_Sub_Trm_Occ` does not have to take `subtrm` as an argument.
Instead, it would be better if we
- implement `All_Sub_Trm_Occ` as `All_Sub_Trm_Occ of (subtr…
-
Pallet Jack/Lifter Crafting and dissembling changes Resources
**To Reproduce**
Steps to reproduce the behavior:
1. Craft a "Pallet lifter" (Vehicle parts) >bottle jack (jacking 14) and other p…
-
This feature is only valid if pneumatics are used on the robot.
Add a pneumatic pressure indicator on the dashboard to alert the driver/operator if pneumatic pressure drops too low. (This can happ…
-
This will be useful when used with `Depth_Of`.