-
Library Arduino_Uno_WiFi_Dev_Ed_Library claims to run on (avr) architecture(s) and may be incompatible with your current board which runs on (megaavr) architecture(s)
-
There is a really bad while loop in the transmit interrupt driver that causes the CPU to spend most of its time looping with interrupts disabled in the interrupt driver.
I must say I was very surp…
-
I can get tone working successfully on PA3 (Arduino pin 16) and PA5 (Arduino pin 1) on the ATtiny3216.
According to the datasheet the ATtiny202/402 has an output from TCB0 on PA6, Arduino pin 0, bu…
-
This bug is inherited from the Arduino megaavr package, it is not in the original avr. The offending line is this:
`while(!((*_hwserial_module).STATUS & USART_DREIF_bm));`
It causes the CPU to s…
-
It is not possible to add a call to tone and, at the same time, invoke the servo. Seems like they are using the same timer. Simply try the following example to replicate the issue:
```
#include
…
-
Hi,
I'm using IDE 1.8.9. on macOS and megaAVR 1.8.1 is installed.
It appears there is an issue with the new megaAVR based Arduino Nano Every and its analog pins. This code does not blink an LED …
-
We need a megaAVR compatible implementation of Servo.h. See also #16 regarding where to use what timer.
-
C:\Users\svandebor\Documents\Arduino\hardware\megaTinyCore\megaavr\cores\arduino\wiring.c:71:8: warning: missing terminating " character
#error "No millis timer selected.
^
C:\Users\…
-
On reflection, I think removing these will create more problems than it solves.
It's much simpler here though, since the ADC on the megaAVRs doesn't have differential channels (interesting - they …
-
Using the OSC library from CNMAT, I get an error when compiling, that HardwareSerial is missing.
```
Arduino: 1.8.9 (Mac OS X), Board: "Arduino Nano Every, None (ATMEGA4809)"
/Applications/Arduin…