-
```
This is enhancement suggestion:
Is it possible to show decimals like 0.6m for altitude?
For all flying multicopters alt above the ground is critical. Most of flight
controllers are using MS5611 p…
-
```
This is enhancement suggestion:
Is it possible to show decimals like 0.6m for altitude?
For all flying multicopters alt above the ground is critical. Most of flight
controllers are using MS5611 p…
-
```
This is enhancement suggestion:
Is it possible to show decimals like 0.6m for altitude?
For all flying multicopters alt above the ground is critical. Most of flight
controllers are using MS5611 p…
-
Hi Mike!
I'm trying to get two IMUs working on a Arduino DUE board at the same time. One is a 10 DOF IMU board (MS5611+HMC5883L+MPU6050) and the other is a 6 DOF IMU (MPU6050 alone).
I connected th…
-
```
This is enhancement suggestion:
Is it possible to show decimals like 0.6m for altitude?
For all flying multicopters alt above the ground is critical. Most of flight
controllers are using MS5611 p…
-
This includes #1691. @davids5 @sjwilks These are the combined symptoms of disabling stack checking:
- V1: microSD mount fails
- V3: USB serial link (NuttX) is started, but never registers with the hos…
-
```
This is enhancement suggestion:
Is it possible to show decimals like 0.6m for altitude?
For all flying multicopters alt above the ground is critical. Most of flight
controllers are using MS5611 p…
-
Hi,
I've tried the FreeIMU_serial sketch on my IMUduino (Arduino Leonardo + freeIMU), but I got an error when compiling the code.
The Arduino IDE tell me that the sketch is too big, about 43.452 byte…
-
Hello !
Raspberry Pi Model B with 3.18.5-2-ARCH armv6l GNU/Linux
i2c driver crashes after random time with this message:
```
BUG: scheduling while atomic: ms5611_d/157/0x00000002
[ +0,000185] Modul…
-
@tridge Something for you to tinker on? Would get us better tests on FMUv3.