-
I like to only know if this project ioBroker.sonoff is being cancelled. Otherwise any estimation for sleeping phase off? This should not be understood as kind of pressure. I only want to know if ioBro…
-
Can't load HASwitchPlate-TJC.hmi file into the nextion editor. The problem does not exist when loading HASwitchPlate.hmi file, or other .hmi files.
-
I hope for a good idea: ;-)
...I don' t know what is the best way to read received data from serial interfaces at the right time.
I can send data to the serial device, data get back from it to the…
-
Hi everybody
I have upgraded the 4.3.8 firmware which worked fine with my MKS Gen 1.3 to the 4.3.9 firmware using same Configuration_Overall.h file in the online configurator . But the only thin…
-
I've had to revert back to SimHub.6.09.1 to get live and global maps to work properly in rFactor 2. In the last two updates .2 & .3 they don't refresh properly even after deleting and re-adding them, …
-
### ISSUE DESCRIPTION - TROUBLESHOOTING
Nextion display send data via serial port using ascii string that ends with a triple ansi code delimiter \xFF\xFF\xFF…
-
I would like to rewrite the way plugins are compiled or not.
- this would allow MORE (in fact as much as we like) plugins sets, for example a 'micro' one (to still fit on 1M boards)
- you would be…
-
Can I use the AC712-5A directly on the 250Vac, the basic configuration and made on the 12Vcc but we don't measure the totality of the current used by the machine. (Heating bed: 24Vcc, and the voltages…
-
I got compling errors with the latest Arduino IDE 1.8.10 (Windows 7) Board: "Arduino Mega 2560" and the latest MK4duo FW version 4.4.0.
I've used online configurator.
### My file `Configuration_…
-
Hi, i am experiencing brownout reset issues. I double check power module, use 10A 5V and even splitted esp32 from 5v and powered 5A 3V but nothing changes. When homing, randomly brownout reset occurs …