-
- [ ] Requirements definition
- [ ] Schematic completed
- [ ] PCB(s?) routed
- [ ] Schematic/PCB reviewed
- [ ] BOM generated
- [ ] Gerbers generated
- [ ] MCAD generated
-
- [x] Identify boundaries currently pulling from WSD_Parks equivalent to the latest Lands release and transition to Lands where possible.
- Unfortunately no boundaries met this criteria...
- Manuall…
-
Qual'è la causa dell'errore?
-
@tnn77 @T-Kodaira
- I now pushed a 2-ways-communication version of the buoy without the need to use the qwiic switch:
- firmware: https://github.com/jerabaul29/OpenMetBuoy-v2021a/tree/main/legac…
-
It is cleared only with step through debug session.
But if I put breakpoints on line 6816 and line 6822, the second breakpoint will not be reached.
The reason is that UIF flag is set, though not im…
-
I have been attempting to power down the modem using the commands provided, and methods presented in various issues here, but have not had success.
my setup runs this function to start the modem:
…
-
## Overview - The slider problem
The device ***AC4236/10*** has the following speed options (don't ask me why):
**Speed options day mode:**
- Automatic mode
- Speed option 1 (~ at 15% of full…
ghost updated
2 years ago
-
Hello,
I am currently developing an app for ESP32 using NimBLE, that will pair and bond with an Android and iOS application. I am using "just works" pairing method.
I have some problems with bo…
-
I'm attempting to install BasicSR via pip and conda.
After setting the environment variable to enable extension compilation, when I build I receive the following error.
```
The detected CUDA…
-
T-Beam uses AXP chips to control power related things. Battery voltage measurement is done through those chips and some code must be added to PWR driver. E-Gauge can be used too.