-
I've been struggling to get a Nix image on a raspberry pi.
Whenever I flash the image and boot it up, just before it gets to an interactive prompt, the screen goes black (no signal).
I've just det…
-
Problem: Pi won't boot with the OS.
Details:
I Downloaded the image and unziped using 7-zip. I then installed the image using raspberry Pi imager v1.7.5. When plug in power, after the SD card is a…
-
Добавить в Sprut.hub и/или Sprut.home технические показатели с RaspberryPi как например в HomeBridge:
- температура или температура процессора
- сигнал и статус подключения к wifi
- нагрузка на …
-
### Describe the bug
Booting linux on a Raspberry Pi 4 B 2GB with a monitor that has native resolution of 1366x768 plugged in the HDMI0 port, it does get image but image is very low quality and let…
-
Hello. I'll get straight to the point; I've got a Raspberry Pi, have a eeprom hooked up, but can't get the program to recognize the chip. I tried to find a solution but was unsuccessful, I've been usi…
-
When we have a working Raspberry Pi with all the software it requires installed and working correctly, we will create an image of that Pi, so we can easily replicate it, without the need to install an…
-
ラズパイ4買ったけど[Raspberry Pi 完全に理解した](https://docs.google.com/presentation/d/16v0xwy2e966q_EL-EWG-AGi9AY_8ZN_i3ZT-0puoi0I/edit?usp=sharing) スライドで詳しい手順書いておらず曖昧だったので書き残す。
イメージ書き込みはWindowsマシンで。
# WinマシンでO…
-
Hi,
I am trying to install and run tuya convert but it does not work.
I am using raspberry pi 4b+ 2gb ram 16gb sdcard freshly installed raspbian buster image, connected over lan.
Cloned the reposit…
-
With a recent update to Raspbian, it's necessary to add `arm_64bit=0` to /boot/config.txt and reboot in order to get the pps working
-
### Description
Failed to run image built with arm v6 architecture. No issue running image built with arm64 v8 architecture. Encounter error message below when attempt to start the container:
```
…