-
Understand there is the option of adding a GPS sensor. Yet, why not providing a soft-GPS function if a hardware GPS module is missing? Since the Feinstaubsensor has Internet access anyway, you could e…
-
Hi,
I have replaced the motherboard on a control system that has been working for some years.
On the new board the DS9097U-009 is not connecting. Clearly all the board hardware is new but hard drive…
-
Hi there.
Pre-history: #597
I have a setup of one OrangePi One board with 3 USB hubs (each hub has its own PSU) connected to each other and 17 UPSes to monitor. Most of them are Eaton PW9120 6000i …
-
(ham radio enhancement) Would be awesome if you could integrate with RumlogNG to get rig control data. Rumlog provides network accesses to FLdigi and WSJT over network interfaces (specifically uses a…
-
**Please complete the following information:**
- OS and Version: [e.g. Ubuntu 18.04]
- ROS Version: [melodic]
- Built from Source or Downloaded from Official Repository:
-
I got different IP …
-
Request UPB binding enhancement to listen to status updates and scene (link) activation requests sent out by UPB devices, and then pass these updates into OpenHAB (i.e. as Events, or state changes.)
…
-
Hello,
I have a problem with the lib.
If I'm using the Font "Font5x8", the lines doesn't match (see photo). If I'm using the Font "Tahoma11x13" all is fine.
Any hints? I dont't have an Idea…
-
_From @GoogleCodeExporter on May 31, 2015 11:25_
```
Currently, only some rooted phones allow for serial commands out of the USB
port. On those it is non-trivial to get serial commands in and out of…
-
Python Code:
```
import pyvisa
pyvisa.log_to_screen()
rm = pyvisa.ResourceManager()
print(rm.list_resources())
```
Reinstalling python didn't fix the issue as mentioned in other Threads. Wh…
-
The Spectravideo SVI-727 80 columns card allows MSX1 machines to run CP/M with 80 columns. There is a special CP/M version for this hardware. The hardware contains a CRTC6845 chip and is already suppo…