-
### Port, board and/or hardware
rp2, mimxrt, SAMD, but maybe other's as well
### MicroPython version
MicroPython v1.24.0-preview.23.g8809ae716.dirty on 2024-07-16; Raspberry Pi Pico with RP20…
-
We have some issues with the EEPROM lib ...
The effects we see in a more complex program:
We write >1,5k of data and finally do a commit(). This gives no error, but it seems that after next dev…
-
Moving this from an email thread, as requested.
A few reports came in to Code.org about our AppLab and Circuit Playground integration. Users are seeing unexpected behavior with Button B on the Circ…
-
I'm using an ESP8266 with the FirebaseClient library to connect to a Firebase Realtime Database. However, after flashing the provided code, the ESP8266 reboots every second. I have tested this on anot…
-
### Category
Other
### Hardware
Rak4631
### Firmware Version
2.5.8.2ba72c15
### Description
When trying to compile customized firmware (using a fresh clone of the master branch) for a device _b…
-
Hi!
I'm getting the messaage "no arduino connected" even tho I can build the sketch and my arduino ide is set to the port.
I'm using ubuntu gnome, arduino ide 1.8.4, and arduino-upload 1.1.0, atom…
-
**Describe the bug**
I'm trying to setup a SH1106 1.3" display using this library. Unfortunately whenever I try to compile it in the IDE, even with the minimal example given in the README.md, I get t…
-
There are very low cost STM32 that don't even require an external oscillator to be used with USB.
__Note: We are not making this change for the V1.0 hardware. The Crowd Funding campaign will rely o…
esden updated
2 years ago
-
The DSD321 library is not compatible with the Atmega4809. It has a lot of variables used that aren't recognised. Full log:
```
WARNING: library Nova_Fitness_Sds_dust_sensors_library claims to run on…
-
Hi I will include my config below, but my problem is that I have Livolo Switches that receive RF codes, but when I send the code that I need it not work, but when I send a shorter code it works perfec…