-
I`m just discovering the existence of LoRa and have bought an RFM95 and connected the following pin-out
`
PI Port RFM95 Port
3v3 = VCC
GND = GND
GPIO10 = SPI_MOSI = MOSI
GPIO9 = SPI_MISO = MISO
G…
-
NATO and US forces use standard symbols for reporting the results of route reconnaissance. I will look more into the standards, since the ones I know of are no longer active, but here's an example of …
-
### What happened?
After updating zigbee2mqtt to version 1.37.0 in HA I fond repeated frame parsing error in the log:
`[2024-05-04 11:50:24] error: zh:ezsp:ezsp: Frame changeSourceRouteHandler pa…
-
Hello, thanks for sharing your work on this communication tool. My ENC-360-12 just arrived, the ability to datalog was a big factor in the decision to buy. In the readme file you clearly stated that t…
-
I am currently having trouble connecting to a remote server through UART, I am currently using /dev/ttyS0 at 9600 bps. Elsewhere, I have seen mention of bridging jumpers on the bottom of the board. Is…
-
Hello,
its super basic program for start with occt and gtk.
Thanks
But I got this message after exit by top right cross
...
Display scale: 1
*** Abort *** an exception was raised, but no catch…
-
First i must say you did a great work i found the videos and this scrip to be a great help and i did manage to pass the p2000 quadro when its on the second slot.
Due to the bandwidth limitation (x4pc…
-
### systemd version the issue has been seen with
252.5-2ubuntu3.1
### Used distribution
Ubuntu 23.04 and Debian Linux 6.1.21-v7l+ #1642 SMP Mon Apr 3 17:22:30 BST 2023 armv7l
### Linux ke…
-
the bin/bt_exploiter still try to probe ttyUSB0/1/2, even the ttyUSB3 has been specified by '--host-port' arg.
```bash
sudo bin/bt_exploiter --host-port=/dev/ttyUSB3 --target=xx:xx:xx:xx:xx:xx --…
-
Aqara roller shade companion E1 device stops working. It was working at least during 3 days and now without doing anything it reports errors and also happens again at least 2 times more. I use sonoff …