-
### Description
Layers shifts with the latest bugfix-2.0.x.
### Steps to Reproduce
1. Start printing a part,
2. After several hours I can see a layer shift
**Expected behavior:** I shou…
-
It would be really nice if software was able to use TMCs driver SPI-configuration.
Especially now, when Trinamic released new TMC5161 drivers capable of running at 4A.
https://www.trinamic.com/prod…
-
Just an idee:
Wouldn't it make sense if people claim ONE STL file at the time they are converting to STEP / Fusion 360? Or making a conversion status list:
| STL | Part of STL | Who | Status | ETD…
-
Only found the version without the Trinamic motor drivers.
-
This is nearly a duplicate of #1802 with the exception that I'm building Marlin 1.1.9 for the melzi platform rather than Marlin_bugfix_2.0.x for an ATMEGA2560 in #1802. 1802 is closed so I assume tha…
-
Hello,
the TMC5160 has no vsense information but the method set rms consider the vsense.
FYI I use your lib in this project:
https://groups.io/g/TeenAstro/
the Rsense for the TMC5160 bob i…
-
Does this Board support the TMC2130 Silent StepSticks?
-
Found while trying to fix Travis builds:
```
$ use_example_configs STM32F10
The command "use_example_configs STM32F10" exited with 0.
13.14s$ build_marlin_pio ${TRAVIS_BUILD_DIR} ${TEST_PLATFORM…
-
- Description: I did install a TMC2130 driver in my printer lately and configured the firmware to use it. At first i notices that it moved much more (in terms of length) than my TMC2100 that was insta…
-
I cloned the PyTrinamic repo on my RaspberryPi using `git clone https://github.com/trinamic/PyTrinamic.git` while in the directory `/home/pi/Documents`.
Then, I did `cd` to the `/examples/evalboard…