-
Reproduce: upload blink sketch from arduino and try to copy it from bootloader will cause the issue. This issue does not happen when DFU with uf2 file.
Note: usb analyzer doesn't show any failed tr…
-
i was running code that worked perfectly before but after updating to the most recent master it started hard crashing and then wiped itself
-
3.x - OK
4.x - Not working
UF2 Bootloader v2.0.0-adafruit.9 SFHWRO
Model: Feather M0 Express
Board-ID: SAMD21G18A-Feather-M0-Express-v0
User: root
Initial USB connection dmesg:
[ 212.866…
tboie updated
5 years ago
-
Running the basics/gen_stack_overflow.py test using #893 has crashed my board so hard that I'm unable to revive it.
I have the latest bootloader from https://github.com/adafruit/uf2-samdx1/releases…
notro updated
5 years ago
-
Hello,
This is my stuff:
Switch in 6.2 fw
Using a modchip
Reinx 2.0
AutoRCM
After the update of hekate, the auto HOS not works properly... I check the .ini file, it's enable with parameter …
-
Sometimes bad code in `boot.py` or `code.py` can leave the board in a stuck state with no access to CIRCUITPY or the REPL.
Some ways to get out of this state:
1. Erase SPI flash: we have some .uf2…
-
Is it possible to develop a composite boot-loader like [this](https://github.com/watterott/SAM-BAR) ?
Aslo, I found [this](http://www.avislab.com/blog/stm32-bootloader_ru/) project that managed to im…
-
not issues as much as discussion points
- we already discussed renaming the 5V net to VIN in order to match the board silk, and renaming the VIN net to V_SUPPLY. Just noting for record keeping.
…
-
The board_config.h file points the Feather M0 Express.
https://github.com/adafruit/uf2-samdx1/blob/c44317fb1057c1a7b0ee948720dc5f3e46122f83/boards/radiofruit_m0/board_config.h#L7
What are the boar…
-
I updated CircuitPython on my Trellis M4 and any code involving the NeoPixels is failing to function properly.
The failure is:
1. All of the NeoPIxels will turn bright white (evidently `(255, 255,…