-
- [x] I have searched the [issues](https://github.com/HeligPfleigh/react-native-thermal-receipt-printer/issues) of this repository and believe that this is not a duplicate.
Trying to print using US…
-
"Could have LEDs"
-
### Describe the bug
Despite multiple USB packages being installed by default, such as usbcore, from what i can tell until installing kmod-usb-xhci-mtk to gain support for the mediatek USB controller…
-
**The Problem To Be Solved**
Using `csolution convert ... --quiet` suppresses warnings. As consequence the `cbuild setup` command does also not show any warnings.
```
>csolution convert USB_Dev…
-
Please provide base setup guide:
- Where to add display usb setup
- Full List of dependencies
- First Steps. How connect to display and print something
-
Hi , I'm having an issue where using any sketch I see the display powered On and everything is ok if I plug the USB before , and stay On when unplugged with the battery connected. But if I only use th…
-
I want to understand what `alsa_ucm-conf` is about exactly regarding the support for specific devices. I'm thinking to buy a Roland Rubix series audio interface (either 22 or 24) and I'm wondering if …
-
When putting the LIBs in the USB, only the 2, 3 and 5 channels are installable. The 24ch will not be found, as if there is no file in the USB. Tried also in an empty USB with only this LIB in the COLO…
-
i feel like im so close to getting android on this thing. i even try to run system.img after this was done, in usb transfer mode to no avail. i even tried reinstalling stock firmware (before the ota i…
-
### Checks
- [x] I have checked existing [__DKWDRV issues__](https://github.com/DKWDRV/DKWDRV/issues) for duplicates and found none.
- [X] I am using [latest version](https://github.com/DKWDRV/DKWDRV…