-
As soon as #64 was addressed, it became obvious that having multiple devices plugged in would be a very good idea.
This USB hub seems to work well, can can be powered from our own internal +5 volt…
-
Is this repo still actively maintained?
I'm asking since a few crates are outdated right now and it would be great to have updated deps.
For instance, in rusb there was a patch in 0.9.4 that fix…
maaft updated
2 weeks ago
-
I'm using an ESP32-S3 chip. I want to use it from USB/IP. I have another USB device that would give me a DHCP address for my ESP32-S3 chip. I want to send a simple UDP packet across USB/IP to the othe…
-
I've been using VSCode under Windows with the ESP-IDF framework for a while, but I'm now trying out the esp-iot-bridge project. After using `git clone https://github.com/espressif/esp-iot-bridge` I ca…
-
25/14/2024 18:14:27 - INFO -
-
If I try to build a SingleObject example such as BootKeyboard and get link errors for USB_SendControl(), USB_Send(), USB_RecvControl(). I am able to build Multi-Report devices without issue and can, i…
-
Thanks for this great tool! I‘m looking forward the batch-dumping. :)
Sadly my sd-card is really full. Is it possible to select a HDD as the destination for the dumps? I think this would be the best …
-
![2018-08-02 3 25 11](https://user-images.githubusercontent.com/24934234/43568826-4439a4ea-9668-11e8-99e5-73f698f8f71f.png)
But my iPhone is already connected to my Mac.
iPhone - 11.1
Mac fri…
-
The nut driver is normally loaded during boot, if there was no UPS connected at boot time the driver will be terminated and will not start automatically if you plug it later. It can be fixed by adding…
-
Hello,
I've been trying to adapt an open source FIDO security key firmware to Zephyr RTOS. It worked fine when using HID with the USB transport layer. However, it had issues when using HID-over-GAT…