-
Description of the problem
I installed the 2.15.0-1 driver, the installation process went smoothly, but there is no USB displayed in the network panel, the following is the system log, I hope to you…
-
Your wiring diagram is dangerously incorrect! Pin 40 or 39 can be used for power input, 39 is *not* ground. The circuit in your diagram will blow the Vbus to Vsystem protection diode and damage boar…
-
I am working with Resol-MX and LAN connection using Python3 (You can look at my fork on my repository). I have strange behaviour that would impact using the script for getting data for a time database…
-
I love this project. It's very similar to something I'm working on. Do you know if this would work with the Badger2040W to be able to support deep sleep and fetching data from a http endpoint once a d…
-
### Operating System
Windows 10
### Board
stm32f401blackpill
### Firmware
Custom firmware STM32Arduino and Platformio based.
Main contains the additional required code to set he GPIO pinmux, and…
-
Hello,
thank you for your Rock Pi 5B image. Unfortunately I have to report an issue in the latest Rock Pi 5B image. Right after flashing the image, booting up and applying the system updates there …
-
When I added the CONFIG_BT to the prj.cof file, the board does not work. The LEDs do not light up and the logging functions do not occur. When I remove it and build it ,the board works just fine. Is t…
-
Hi - I have the EVAL-ADSD3175D kit and I built my own SD card image with the linux-imx patches supplied in this repository. When I boot Linux on the i.MX8M SoM, the kernel finds the ADSD3500 device - …
-
### Describe the bug
When I compile the kernel either on a RPi 5 or on my cross-compile machine and use the bcm2712_defconfig file make bindeb-pkg fails with the following error:
sh ./scripts/pa…
-
## Describe the Bug
If `#define SPLIT_USB_DETECT` is used for a split board, the board is not detected by the PC on a cold boot or after repowering a USB hub that it is attached to. For example, my…