-
```
including stdlib.h from a library blows up with a
/avr/include/stdlib.h:111: error: expected unqualified-id before 'int'
This is because wiring.h tries to define abs() itself. Wiring.h tries …
-
There isn't a good how-to for wiring, setup and use.
-
```
including stdlib.h from a library blows up with a
/avr/include/stdlib.h:111: error: expected unqualified-id before 'int'
This is because wiring.h tries to define abs() itself. Wiring.h tries …
-
```
What steps will reproduce the problem?
1. Core libs location has changed to
ARDUINO_BASE/hardware/arduino/avr/cores/arduino
so I changed ARDUINO_CORE_DIR =
${ARDUINO_BASE_DIR}/hardware/arduino/a…
-
I've tried with 3 different esp8266 modules and 3 different pn532 boards and can't get it working.
I've triple checked the wiring, soldering, etc...
Home assistant running locally and not exposed …
-
Up to now there is a lack of documentation of the wiring and setup of the gpio. Only the hall sensors are explicitly defined. That means e.g. the temp/humidity sensor of ardadfruit is taking the defau…
gisma updated
4 years ago
-
This would allow teams to have their RobotBuilder project files to be used by multiple people and let it be in their version control system.
Something like
```
~
|_ Robotbuilder
|_ settings…
-
### Robot Name 🤖
ergoCub 1.2 S/N:002
### Request/Failure description
The hand fingertip skins are not working.
### Detailed context
With @S-Dafarra we checked more #1831 and found the following…
-
In online documentation page https://www.arduino.cc/en/Tutorial/DigitalReadSerial there are two errors:
1. circuit image shows not proper pin-2 connection to a breadboard. IMO it should be connected …
-
I am installing the CNC32+TS35 board (not the DLC32) on a 3018 Pro upgraded to 3040 and have some questions:
1. I can move the Z axis using Jog but it does not move when I perform a home (X/Y axis ho…