-
```
看了wiki，有点晕，老是看到 maskstr
的出现。。。。都不知道这东西设置了有什么用，为什么要��
�置，该如何设置。
“maskstr为value的属性格式。该属性格式由问号分隔的数字组��
�。这些数字表示对应属性项所占用的空间的bit数。比如4:3:1��
�示有三个属
性，这三个属性分别占用4bit，3bit，1bit。属性的值必须为正��
�数，最大值为有符号4字节整型…
-
bug, see : https://www.bilibili.com/video/BV1XM4y1G7AM/
yuxhe updated
3 years ago
-
Hi,
I'm doing something similar on nodeMCU and Maverick ET-73 probe.
Only 1 probe and sampling for now.
I used same resistor 22kOhm, and same coefficient and approach, but i'm struggling on scale …
-
I have another idProduct (4d4b) which is not listed.
This is my adapter: https://www.aliexpress.com/item/2-Players-Controller-OTG-USB-Adaptor-for-SEGA-GENESIS-MD-Atari-BlackJoystick-Controller-for-…
-
COGDumper downloads the whole header. See this example which is a BIGTIFF with a 400mb header!
```
cogdumper http --server https://s3-ap-southeast-2.amazonaws.com --path linz-test-data --resource …
-
请问二值化的linear和matmul操作是否支持？
-
```
What steps will reproduce the problem?
1. Try to load the attached image input.pbm using PIX* pixs =
pixRead("input.pbm")
2. Call PIX* pixd = pixRotate90(pixs,1) or PIX *pid = pixScale(pixs,3.0,3…
-
```
What steps will reproduce the problem?
1. Try to load the attached image input.pbm using PIX* pixs =
pixRead("input.pbm")
2. Call PIX* pixd = pixRotate90(pixs,1) or PIX *pid = pixScale(pixs,3.0,3…
-
项目中使用到Flash-DB，划分了多个分区，有的分区在SPI_Flash芯片上，有的分区在内部flash上。现在的问题是：内部flash的写入颗粒度是4字节（32bit），而SPI-Flash的写入颗粒度是1bit，如何配置FDB_WRITE_GRAN？我配置成1后，由于内部flash的写函数必须4字节对齐，但是使用过程中，有些数据的写入，fal_partition_write函数传入的地址参数…
-
### Have you read the Contributing Guidelines on issues?
- [X] I have read the [Contributing Guidelines on issues](https://github.com/stoneatom/stonedb/blob/stonedb-5.7-dev/CONTRIBUTING.md).
###…