-
Hello,
**Thanks for showing your interest in [GSSoC 2020](https://www.gssoc.tech/).**
Super glad to know that you're interested in contributing to **[Water Monitoring System](https://github.com/v…
-
I have created an easy to use binding between LVGL and MicroPython. The "official" binding was too complicated to compile and get working properly and it didn't support I8080 or RGB busses. The one th…
-
I'd love to use this project in a personal project of my own, but I'm having a hard time getting things up and running. So far, I have successfully flashed the firmware on the device and can access a …
-
I have problem with MicroPython from ESP8266_GENERIC-20231005-v1.21.0.bin. Using ESP-01 (1MB flash) and [programmer](https://www.aliexpress.com/item/32831857167.html?src=google&src=google&albch=shoppi…
-
Please include the following information when submitting a bug report:
* The Pycom board you are using (e.g. WiPy 2.0, LoPy).
* The firmware version you are using. You can get it by executing the …
-
[Ampy](https://github.com/adafruit/ampy) GET, PUT and LS commands do not work with esp8266 via ampy.
I also opened a [issue on Ampy project](https://github.com/adafruit/ampy/issues/48).
Firmware: …
-
I am trying to get the software-side of this project to work - to no avail.
I have installed Python on my Windows Laptop.
I then need to install the python package installer (pip) and only then ca…
-
Im trying to make a stub for the board A9G pudding.
**Describe the bug**
I don't know, but when I run the following command:
```sh
micropy stubs create /dev/ttyUSB0
```
This spit…
-
Add support for Micropython for compatible boards (e.g. esp8266 family)
- Digi Xbee3 Board Support https://github.com/platformio/platformio-core/issues/2863
- Raspberry Pi (https://github.com/pl…
-
My board is [LILYGO T-Display-S3](https://www.tindie.com/products/lilygo/lilygo-t-display-s3-esp32-s3-19-inch-st7789-lcd/?utm_source=hackaday&utm_medium=link&utm_campaign=fromstore), I successfully co…